The Operation of the Boiler Dust Collector Should Be Started from the Details

No matter how good the equipment is used for a long time, there will be some minor problems, which will affect the efficiency of industrial work. If there is a problem with the boiler dust collector equipment, it will definitely affect the dust removal efficiency of the boiler dust collector, such as the resistance of the boiler dust collector in operation. If it is too high, the air volume of the boiler dust collector system will decrease significantly. Therefore, after the resistance of the boiler dust collector reaches a certain value, the dust must be cleaned in time, but the primary layer must not be destroyed during the dust removal, otherwise the efficiency will be affected.

1. Replacement of parts of the boiler dust collector

The dust removal mode adopted in the industry overcomes the shortcomings of the conventional dust collector sub-chamber back-blowing dust collector, so that the dust removal capacity and dust removal efficiency of the boiler dust collector have been greatly improved. The boiler dust collector must be carefully inspected before installation. All the dust bag bags used should be inspected one by one. Don't miss any defects. Small defects will become a big hidden danger in the future. Therefore, we must not be sloppy. For the unusable parts that are checked out, go to purchase matching accessories from professional manufacturers, and then replace the old parts in the boiler dust collector with new ones.

2. The temperature resistance of the boiler dust collector

If you are using a small-tonnage boiler dust collector, the air volume is 2500-3000m3/h, and the flue gas outlet temperature is 350-400℃. The selected boiler dust collector bag is a normal temperature resistant cloth bag with a temperature resistance of 90-110℃. Therefore, a cooler is installed at the front end of the boiler dust collector to ensure that the flue gas temperature is not greater than 90℃.