After the electrostatic dust precipitator is installed, it must undergo debugging and various accuracy checks, and then conduct a trial operation (also called no-load operation) to further verify the quality of design, installation, and debugging. The electrostatic precipitator needs to eliminate the defects of the equipment during the trial operation. Therefore, it sometimes needs to be carried out many times until all are qualified and there is no abnormal phenomenon before it can be officially put into operation.
The operation of the electrostatic dust precipitators mainly includes the trial operation before the commissioning, the start of the commissioning procedure, and the inspection after the equipment is put into operation. Before the electrostatic precipitator is put into operation, test operation of each component is carried out in order to find the problem separately and eliminate it in time. After the inspection and trial run are qualified, the start-up operation can be started. The life of the polar plates and polar lines will also affect the quality of transmission and other mechanisms. It should be maintained regularly after decommissioning.
During the operation of electrostatic dust precipitators, its dust removal efficiency and equipment life depend to a large extent on the quality of operation and maintenance.
The operation, maintenance and management of electrostatic dust precipitators is a very demanding and difficult task, and there should be professionals for operation and management. Electrostatic precipitator professionals should have certain electrical and mechanical knowledge, and have a more comprehensive understanding of the structure and performance of the equipment, operating requirements, safety, maintenance, and maintenance knowledge. At the same time, it is necessary to establish necessary management and operation procedures, safe operation and maintenance systems, as well as post responsibility systems and responsibilities. You will get more details about jet filter.
The maintenance of the electrostatic dust precipitators mainly includes the maintenance of the motor, the rapping drive system, the ash discharge valve, the ash hopper, the heating device and temperature control device in the incubator, the damping resistance in the incubator, various sealing sleeves, low-voltage power distribution room equipment, and rectification. Inspection of transformers, high-voltage rectifier control cabinets and other equipment, the specific operation process and specific details. The electrostatic precipitator operators analyze and eliminate the displays and alarms issued by their respective control systems and various accidents that occur in the equipment in a timely manner. Major problems can be reported to the superior department in time and recorded.
English
Español
русский
日本語
한국어
العربية
हिंदी
Türkçe
ไทย
tiếng việt
