1. When making and installing the pulse bag filter, it is necessary to strictly implement the JC/T532 welding standard for welding to prevent the phenomenon of less welding and missing welding of the dust collector.
2. The discharge port of the pulse bag filter should adopt an air lock device with good sealing performance. At present, the pneumatic or electric air lock valve is mainly used. When necessary, a double-stage air lock device can be used. The air leakage rate of a pulse bag filter should be controlled within the range of ≤3%.
When a humidifying tower is used as the cooling device at the kiln end of the dry process cement line, it is not possible to unilaterally pursue the cooling effect and increase the water spraying amount. The water spraying amount of the humidifying tower must be strictly controlled while ensuring the inlet temperature of the pulse bag filter. The humidification tower adopts high-quality spray guns as much as possible to make the sprayed water fine and uniform, and achieve the best cooling and tempering effect with the least amount of water.
When the temperature of the flue gas to be treated is too high, cooling measures such as lowering the operating temperature and releasing cold air must be taken immediately; when the temperature of the flue gas is low, heating measures such as increasing the operating temperature must be taken immediately. The flue gas temperature can be stabilized within the specified range to ensure the normal and stable operation of the pulse bag filter and reduce condensation.
1. At present, the commonly used air supply routes for compressed gas in China are mainly: compressed air-air storage tank-air source triplet-air bag-electromagnetic pulse valve. This gas supply method has the advantages of less investment and simple equipment, but when the outside air temperature is too low, the compressed gas treatment is insufficient and condensation is easy.
2. When the outside air temperature is too low and the air compressor station is far away, the air supply route can be used: compressed air - air storage tank - air source triplet - air dryer - air heater - air bag (Insulation material for air bag laying)——electromagnetic pulse valve. This air supply method dehumidifies fully and thoroughly, and the temperature difference between the pulse injection gas and the flue gas inside the pulse bag filter is small, and condensation is not easy to occur. When the air compressor station is not far away and the air filter in the air source triplet can meet the needs of dehumidification, just pay attention to the air filter close to the air bag, so the air dryer can be omitted. When the temperature is too low, heat preservation measures must be taken for the gas pipeline, air bag and electromagnetic pulse valve to prevent condensation of compressed air and condensation of dust collector.
The shell of the pulse bag filter must take thermal insulation measures. The thermal insulation of the pulse bag filter generally adopts rock wool, aluminum silicate board, pearl expanded rock and other thermal insulation materials with low thermal conductivity, good thermal insulation performance, low water absorption rate and good heat resistance performance. . The thermal conductivity of the material generally does not exceed 0.23W/m.K. The thickness of the thermal insulation material should be determined according to the geographical location, the local minimum annual temperature, and the annual average temperature.
Senotay is a trustworthy supplier who is committed to providing top-quality China dust collector equipment. Contact us now!
English
Español
русский
日本語
한국어
العربية
हिंदी
Türkçe
ไทย
tiếng việt
