The performance of the boiler dust collector is stable, and the noise generated by the boiler dust collector during operation is also relatively small. In the process of installing the boiler dust collector, the steps are simple and the maintenance is more convenient.
One of the advantages of the boiler dust collector is that after many years of use, the degree of wear of its internal components is relatively low. The important thing for a device is the relevant parameters. During the operation, its power, processing air volume, technical parameters, and static pressure play an important role.
Among them, the processing air volume of the boiler dust collector refers to the dust collection equipment, and we need to observe the working status of the boiler dust collector. It can be observed from the use situation, it will change with various working conditions, we also need to look at the rate when we actually use it. Moreover, the rate of the entire boiler bag filter is relatively high. After cleaning the dust, the initial dust of the boiler dust collector is maintained to avoid affecting the rate of dust removal.
When the boiler exhaust gas temperature is too high, try to adjust the size of the air volume entering the boiler dust collector. Install a thermocouple or install a cold air valve in the air inlet pipe. This should reduce the flue gas temperature, which can effectively prevent the dust bag from being burned. If the flue gas temperature exceeds 180℃ under normal circumstances, the boiler dust collector is not very easy to use, and an electric dust collector should be used.
English
Español
русский
日本語
한국어
العربية
हिंदी
Türkçe
ไทย
tiếng việt
